All
  • All
  • Product Management
  • News
  • Introduction
  • Corporate Outlets
  • FAQ
  • Corporate Videos
  • Corporate Albums

Home

About

Products

Mainly Products

DSC

3.5"

Mechanical Keyboard Type wallmounted DSC

7"

Border Type wall-mounted DSC

Embedded DSC

Border Type Semi-Wall Mounted DSC

Triangle Type wall-mounted DSC

Long Embedded DSC

8"

Wall-mounted DSC

10.4"

Border Type Semi-Wall Mounted DSC

Border Type wall-mounted DSC

Standing Type DSC

15"

Wall-mounted DSC

Border Type Semi-Wall Mounted DSC

Border Type wall-mounted DSC

Standing Type DSC

Slant Type Wall-mounted DSC

Display

3.2"

Segment Display

4.3"

Segment Display

Full Color LCD

5.7"

Blue & White Monochrome LCD

6.4"

Dot Matrix Display

Segment Display

7"

Full Color LCD (Wall-mounted)

Full Color LCD (Embedded)

Full color LCD monitor (Box)

8-19"

8, 8.4, 10.4, 12.1, 15, 17, 19” full-color LCD (Embedded)

8, 8.4, 10.4, 12.1, 15, 17, 19” full-color LCD (Box)

Full Color LCD (Wall-mounted)

19"

Horizontal Preregistration Full Color LCD Display(Box)

22.9"

Vertical Preregistration Full Color LCD Display(Embedded)

Hall Lantern

Box

HK-HL(B)-01

HK-HL(B)-02

HK-HL(B)-03

HK-HL(B)-04

HK-HL(B)-05

HK-HL(B)-10

HK-HL(B)-11

HK-HL(B)-16

HK-HL(B)-17

HK-HL(B)-22

HK-HL(B)-23

HK-HL(B)-24

HK-HL(B)-25

HK-HL(B)-26

Boxless

HK-HL(BL)-06(A)

HK-HL(BL)-07(A)

HK-HL(BL)-08(A)

HK-HL(BL)-09(A)

HK-HL(BL)-12(A)

HK-HL(BL)-13(A)

HK-HL(BL)-14

HK-HL(BL)-15

HK-HL(BL)-18

HK-HL(BL)-19

HK-HL(BL)-20

HK-HL(BL)-21

Elevator Control

Swipe card

Wall-mounted Landing Square Swipe Card Reader

Embedded car square card reader

Wall-mounted car elevator controller

Wall-mounted square swipe card antenna reader

Swipe card+QR code

Square QR Code Swipe Card Controller

Round QR Code Swipe Card Controller

Wall-mounted square QR code swipe card antenna reader

Swipe card+QR code+Face recognition

7” Intelligent accessiable Terminal

8” Intelligent accessiable Terminal

Other

2nd gen Elevator Information Controller

2nd gen Robot Interaction Controller

Wall-mounted protocol type car elevator controller

Wall-mounted Landing Square Gesture Paging Controller

Elevator Protocol Floor Controller

Serial communication elevator control expansion board

Floor Control Extension Module

Third-party communication interfaces

LOP

Box

HK-LS-B-T2 Hera Series LOP

HK-LS-B-T4 Hera Series LOP

HK-LB-B-D1- BO100 Ares Series LOP

HK-LD-BD1-3-BO100 Ares Series LOP

HK-LB-B-D2- TR300 Ares Series LOP

HK-LB-B-E1-BR300 Aphrodite Series LOP

HKLB-B-E2-BO100 Aphrodite Series LOP

HKLB-B-E3-TS300 Aphrodite Series LOP

HK-LD-B-F1-5-BR500 Aphrodite Series LOP

Boxless

HK-LS-BL-T1 Zeus Series LOP

HK-LS-BL-T3 Hera Series LOP

HK-LSBL-A1-1-TO700 Apollo Series LOP

HK-LS-BL-A2-1-BR600(Black) Hephaestus Series LOP

HK-LS-BL-A2-1-BR600(White) Hephaestus Series LOP

HKLS-BL-A3-1-TO700 Hermes Series LOP

HK-LSBL-A4-6-TO700 Apollo Series LOP

HK-LSBL-A5-6-TO700 Apollo Series LOP

HK-LS-BL-A6-1-BR600 Hephaestus Series LOP

HK-LS-BL-A7-1-BR600 Hephaestus Series LOP

HK-LS-BL-A8-1-BR600 Hephaestus Series LOP

HK-LS-BL-A9-1-BR600 Hephaestus Series LOP

HK-LBBL-C-TS107 Hestia Series LOP

HK-LBBL-C-BR300 Poseidon Series LOP

HK-LBBL-C-BS300 Poseidon Series LOP

HK-LSBL-B1-1-BS300 Athena Series LOP

HK-LS-BL-B2-1-BS300 Artemis Series LOP

COP

Tradition

Classic Edition

Luxury Edition

Care Edition

Touch

10.1” Touch COP

10.1” Smart Double Screen

Button

Touch Button

35 Touch Button Series

60 Touch Button Series

70 Touch Button Series

120 Touch Button Series

150 Touch Button Series

180 Touch Button Series

Mechanical Button

32 Mechanical Button Series

33 Mechanical Button Series

35 Mechanical Button Series

40 Mechanical Button Series

60 Mechanical Button Series

125 Mechanical Button Series

150 Mechanical Button Series

180 Mechanical Button Series

Special Function Button

Capacitive Touchless Button Series

Infrared Touchless Button Series

Sterilization Button Series

Pet Button Series

Conveniently Mounted Button Series

Monitor

Visual Monitor

Classic Edition

IoT Edition

Elevator Monitor

General Edition

Intelligent Edition

Digital Tools

Elevator Control

Hikum Access

Hikum Link

Monitor

Elevator Intelligent Monitoring Platform

Display

Elevator Media Distribution System

Solution

Intelligent Passenger Flow Solution System

Elevator Intelligent Dispatch System

Efficient Information Dissemination System

Intelligent Security Linkage System

Precise Digital Monitoring System

Green and Healthy Elevator System

Robot Elevator Riding System

Non-contact Ride System

Double Screen HMI System

Visual Identity System

Application Scenarios

Office Building

School

Hotel

Residential Building

Hospital

Cottage

Business Complexes

Public Transportation Systems

Cultural and Recreational Spaces

Warehouse&Logistics

Case

News

Service

Join

Contact

Introduction to the Elevator DSC Destination Floor Control System


Published Time:

2025-12-08

As urbanization accelerates and the density of high-rise buildings continues to rise, elevators—being the core hub of vertical transportation—have become a focal point of public concern regarding operational efficiency and safety management. The Elevator DSC Destination Floor Control System revolutionizes the traditional call-button elevator model by establishing a closed-loop operating system featuring “pre-selection of destination floors—intelligent allocation—efficient direct service.” This innovative solution is tailored for scenarios such as commercial complexes, high-end office buildings, and ultra-high-rise residential developments, and holds great promise in addressing longstanding industry challenges like long waiting times and uneven capacity distribution.

Breaking free from traditional constraints: Smart escalators reshape operational logic.

Unlike the traditional elevator operation mode, which requires passengers to call for the elevator first and then select their destination floor, the DSC destination-floor control system innovatively moves the floor-selection step to an earlier stage. Before entering the elevator, passengers input their desired floor via the group-monitoring panel located at the floor entrance. The system immediately uses AI algorithms to analyze the current operational status of the elevator group, automatically assigns the optimal elevator, and guides passengers to their designated waiting positions via a display screen. Once inside the elevator, there’s no need for passengers to press any floor-selection buttons in the car—instead, the elevator will directly take passengers to their destination floor, seamlessly integrating “seamless interaction” with “efficient direct access” throughout the entire process.
According to industry test data, this system can increase the operational efficiency of individual elevators by more than 30% by reducing the number of unnecessary elevator stops. During peak hours such as the morning rush hour, when passenger demand is particularly high, waiting times are shortened by 40% to 50% compared to traditional systems, significantly surpassing the industry-recognized "5-minute waiting tolerance limit" and effectively alleviating the public’s pain point of "difficulty in waiting for elevators" in high-rise buildings. A case study involving a high-end office building shows that after implementing the DSC system, the average waiting time during the morning rush hour dropped from 22 minutes to 8 minutes. Elevator occupancy rates have been optimized to a reasonable range, and the frequency of fault reports and repairs has decreased by 25% year-on-year.

Three-Dimensional Security Protection: Technology Builds a Robust Safety Barrier for Elevator Use

While enhancing efficiency, the DSC system regards safety protection as a core design element, establishing a comprehensive safety framework that integrates “intelligent prediction—proactive intervention—emergency coordination.” The system is equipped with a real-time load monitoring module. When it detects that the cabin load exceeds the rated weight, it immediately triggers an audible and visual alarm and keeps the elevator doors open until the load returns to a safe range, thereby preventing overload risks at the source.
For abnormal conditions during elevator operation, the system can collect key parameters such as traction machine vibration and running speed in real time. By using algorithmic models, it can predict potential faults and automatically issue maintenance alerts. Once a trapped-person incident occurs, the system will immediately activate the emergency call platform, simultaneously sending the elevator’s precise location and fault code to maintenance personnel. Coupled with a built-in voice安抚 function, this significantly reduces the response time for rescue operations.

Green, energy-saving, and efficiency-enhancing—supporting low-carbon development of smart cities.

Under the guidance of the “dual-carbon” goals, the DSC system optimizes elevator operation trajectories through intelligent algorithms, reducing unnecessary stops and empty runs, thereby achieving a significant reduction in energy consumption. According to third-party testing, elevator groups equipped with this system show a 30%–40% reduction in overall energy consumption compared to conventional group control systems—equivalent to an annual carbon emission reduction of approximately 1.2 tons per elevator. Meanwhile, the system features full-lifecycle management of operational data and, by analyzing passenger flow patterns, can provide building managers with recommendations for staggered scheduling, further unlocking energy-saving potential.

The significance of industry transformation: ushering in a new chapter of intelligent vertical transportation.

Elevator industry experts point out that the launch of the DSC destination-control system marks a shift in the vertical transportation sector—from “equipment compliance” to “experience optimization.” This system not only addresses the operational pain points of traditional elevators through technological innovation but also leverages data to drive upgrades in building management models, offering a replicable vertical transportation solution for smart city development. Currently, high-end commercial complexes and ultra-high-rise residential projects in several cities—including Beijing, Shanghai, and Rizhao—have adopted this system, and market feedback has been highly positive.
In the future, as 5G and IoT technologies become more deeply integrated, the DSC system will further expand its smart features, such as facial recognition-based elevator call systems and mobile app-based reservation services. This will continue to drive intelligent innovation in the vertical transportation sector, ensuring that every elevator ride is a safe, efficient, and comfortable travel experience.
(Material reprinted from the internet)

Introduction to the Elevator DSC Destination Floor Control System

Summary: The elevator DSC destination-floor control system revolutionizes the traditional call-button elevator model by establishing a closed-loop operating mechanism featuring “pre-selection of floors—intelligent allocation—efficient direct service,” offering a brand-new solution for scenarios such as commercial complexes, high-end office buildings, and ultra-high-rise residential developments.

2025-12-08

The Elevators at the CIIE: Smart and Green Technologies Empowering High-Quality Development of Vertical Transportation

Summary: As seen from the exhibits at this year's CIIE, AI, IoT, robotics, and elevator technology are deeply integrated. Looking ahead, elevators will increasingly become a seamless part of smart building ecosystems, seamlessly linking with security, fire protection, and energy management systems—and ultimately emerging as a vital component of urban digital twin frameworks.

2025-11-13

Safety, intelligence, and high quality: "Good Elevators" Lead the Way in Urban Renewal and Industrial Upgrading.

Summary: The "Good Elevator Innovation Technology Exchange Conference" was successfully held at the Shanghai Expo Exhibition Center.

2025-11-04

Return to List